New
Product Description
Details
General Features:
JL Audio XD200/2v2
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms. The breakthrough that makes this much power possible in such a small chassis is NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency. The XD200/2v2 includes a 12 dB/octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. The XD200/2v2 also features the v2 Spec feature set, which consists of automatic turn-on capability, and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control, the amplifier's level can be directly controlled from the driver's seat. This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
- XDv2 Series Class D 2-Channel Amplifier
- RMS Power Rating @14.4V:
- 4 ohms: 75 watts x 2 chan.
- 2 ohms: 100 watts x 2 chan.
- Bridged 4 ohms: 200 watts x 1 chan.
- RMS Power Rating @12.5V:
- 4 ohms: 60 watts x 2 chan.
- 2 ohms: 90 watts x 2 chan.
- Bridged 4 ohms: 180 watts x 1 chan.
- NexD™ High Speed Switching Class D Technology
- Wired HD-RLC remote level control available, sold separately
- LED power (green), over-current (yellow) and protect (red) indicators
- Advanced Rollback Protection
- Differential Balanced RCA Input
- Pass-through preamp RCA outputs
- Selectable turn-on modes: REM / Offset / Signal
- +12 V Remote Turn-On: Traditional remote lead wire, from headunit
- DC Offset-Sensing: On/Off by detecting a very small DC signal (high-level signal only)
- Signal-Sensing: On/Off by detecting a full-range audio signal at left-channel input (high-level signal only)
- Speaker level inputs via RCA, JL Audio XD-CLRAIC2-SW required
- Heavy duty aluminum alloy heat-sink for extreme heat dissipation
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Detented, Calibrated Filter Freq. Potentiometer
- State-variable, 12dB/octave Butterworth Crossover
- Input sensitivity:
- Low level: 800mV - 8V
- High level: 200mV - 2V
- Frequency Response: 12 - 22,000 Hz
- Total Harmonic Distortion (THD): <1%
- Signal to Noise Ratio: >104 dB
- Damping Factor @4 ohms: >150 / 50 Hz
- Selectable Filter Mode: Off / HP / LP
- Variable low-pass filter: 50 - 500 Hz, 12 dB/octave
- Fuse Rating: 20A x 1 inline (not supplied)
- 8 - 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
- Weight: 4.20 lb
- Dimensions: 7.09"W x 6.85"L x 2.05"H
Additional Information
Additional Information
| Name |
JL Audio XD200/2v2 Class D 2-Channel Car Amplifier - 200W |
| Manufacturer |
JL Audio |
| Internal sku |
JL-XD2002V2 |
| SKU |
XD200/2v2 |
| Weight |
4.20lbs |
| UPC |
699440986007 |
| Promotion ID |
No |
You may also be interested in the following product(s)
-
Regular Price: $399.99
SALE Price: $261.35
-
Regular Price: $129.00
SALE Price: $92.13
-
Regular Price: $159.95
SALE Price: $139.95
-
Regular Price: $699.95
SALE Price: $599.99
