Jl Audio C3-650

Versatile speaker system for any space

JL Audio's Evolution C3 speaker systems allow you to choose the best configuration for great sound in your vehicle. Mount the woofers and tweeters separately, and a C3 component system will fill your car with incredibly detailed, rich, and crystal-clear music, perfectly positioned in your listening space. In vehicles with limited space, you can mount the C3 tweeter inside the woofer to create a full-range, coaxial speaker that still performs with breathtaking impact.

Advanced material construction leads to clean musical reproduction

The C3-650 component system uses a 6-3/4" mica-filled polypropylene woofer that covers the midrange and low frequencies strongly and accurately. A specially designed frame resists unwanted resonances, keeping your music free from interference. If you mount the tweeter separately, simply install a phase plug into the woofer and the sound will disperse smoothly throughout your vehicle.

Silk tweeters and versatile crossover networks

The C3 tweeters use ferrofluid cooling to handle extreme levels of high-frequency information without overheating. Mounted separately or coaxially, these 1" silk dome tweeters broadcast crisp musical detail evenly without harshness. Separate, outboard crossovers use premium components to direct the signal flow to your woofers and tweeters. You can select from three midrange settings and four levels of tweeter presence to match the speaker system to your listening environment.

Product Features:

• 6-1/2" Evolution Series 2-Way Convertible Component Speaker System


• Power Handling:
  
  Peak: 300 watts per set / 150 watts each side
  
  RMS: 150 watts per set / 75 watts each side
  
  Recommended RMS: 25-75 watts each side


• Quickly converts from coaxial to component system


• Phase plug replaces tweeter assembly in component system mode


• Impedance: 4 ohm


• Top-mount depth: 2-9/16"


• Frequency Response: 48-25,000 Hz ± 3 dB


• Sensitivity: 93 dB


• Efficiency: 90 dB @ 1W/1m, 96 dB @ 1W/0.5m


• Hardware for both applications is needed

Woofer Specifications:

• Mineral-filled Polypropylene cone


• Injection-molded Polymer frame


• Patented elevated frame cooling


• Butyl rubber surround


• Patented elevated frame


• DMA-optimized motor system


• Injection-molded, mica-filled, Polypropylene cone


• 1.2" Kapton former voice coil


• Low profile, symmetrical roll spider


• Ferrite magnet structure

Tweeter Features:

• 1" Silk soft dome tweeter


• FerroFluid cooling and damping


• Neodymium magnet structure


• Fixed Angle flush-mount


• Surface-mount and coaxial-mount systems

Crossover Features:

• 4-Position adjustable tweeter level


• 3-Position adjustable midrange presence


• Polyswitch protection


• Premium Mylar capacitors


• Premium air-core inductors


• 1st Order low-pass filter


• 2nd Order high-pass filter

Why install component speakers?

A component speaker system gives you the best possible performance from your car audio system. A system consists of separate woofers, tweeters, and crossovers, each designed to cover one specific range of frequencies. As separate components, the woofer can move freely to deliver more powerful performance, while the tweeter can be custom-mounted in a better spot up closer to your ears, revealing a whole new world of detail. Separate crossovers are far superior to the simple filters wired into full-range speakers, so the components work together for smoother, more focused sound.